Hi,
I have a potentiometer connected to a siemens micromaster 440 to control a servo motor speed and they are not connected to any PLC. Now, I am trying to get the potentiometer to another panel where I have a powerflex 525, PLC, and a HMI. Can I connect the analog input of the siemens drive to the powerflex 525 analog input and control the speed from HMI? Given the situation that I do not have any analog input left to the PLC.
As I am a beginner, there might be some vague questions. If you need further information, please let me know.
Thank you
I have a potentiometer connected to a siemens micromaster 440 to control a servo motor speed and they are not connected to any PLC. Now, I am trying to get the potentiometer to another panel where I have a powerflex 525, PLC, and a HMI. Can I connect the analog input of the siemens drive to the powerflex 525 analog input and control the speed from HMI? Given the situation that I do not have any analog input left to the PLC.
As I am a beginner, there might be some vague questions. If you need further information, please let me know.
Thank you