Feel free to ask any PLC RELATED question here. If you know the answer to an existing question, help everyone by posting an
answer.
Enjoy!!!
I'm a Manufacturing Engineer with limited PLC experience and I am doing some research for our Controls Department.
Does anyone have experience...
Hi,
I have a customer with a S7300 from around 2013 which they link to approx 25 inverters, 3 DP to DP converters and 5 IM153 remote I/O units...
Greetings,
I'm trying to track down the DOS software used to program MACO 4000 series. Any ideas where I could find it?
Being old technology...
I am having trouble with getting no control of my analog output signal. I am using the SCL function block to control my analog output. The logic...
I have a network with 4 PLCs PLC1 is controllogix and PLCs 2-4 are compactlogix and they all need to communicate. The current way I have this...
Hola chicos.
Tengo un problema con el driver de comucicacion dasabcip 5, y un plc controllogix v34, ya realice la comunicacion pero en ciertos...
Looking for some assistance. I am very familiar with Yaskawa VFDs, but not so much with AB VFDs. I am working on some hardwired AB PowerFlex 700...
Hi Everyone,
Thought I had it figured out but I came to the conclusion it would not work. Here is what I'm working with...
1769-L30ER
Flow Meter...
Hi,
Need to find EDOPS2 Plus and the communication cable (wiring config) to support a client.
Please Help
I've been translating Edops 2 program into something more understandable. I got at least half of it figured out. There are a few odd things it...
Hey when I turn on my Siemens PLC CPU 216-2 after runing 10 minute it's stop and showing SF indication after I turn off and some time later turn...
I need to protect some pressure transmitters from hot (120°C) oil. Does anyone have a favorite transmitter cooling element/standoff they use...
Hello,
Ive gotten a few answers on this from the Rockwell tech support but it's just not clear as they often point to the manual. I've also read...
Hello everybody,
I am working for an OEM and we are in the process for trying to raise the effectiveness of the pretesting of machines.
Basically...
Hi.
I need suggestions.
I want accumulate operating hours from a simple XIC condition, so I'm thinking a RTO with a 60000 or 3 600 000 preset, 1...
Hi all. Me again still learning Rockwell.
So I'll be polling an INT data array from a Modbus SE power meter with a L82 (with a Modbus ProSoft in...
Hi All,
How do I set a password to PLC using Proficy machine software 9.5-9.8 or some other way?
I as using Emerson CPE305 CPU.
Thanks.
Hi legends, new to this industry but absolutely loving it.
I am looking to go online with a ControlLogix PLC, the network is supported by a...
Good day, we have 15 analog inputs, we need to log the data in excel and monitor these values through web browser. We're planning to go with Delta...
Dear all,
I have fx3u series plc with built in rs422 port and usb-sc09-fx cable. I have a a hyperterminal like application to send and receive...
Hi Experts,
I would like to make firmware upgrade from v3.0 to v4.5 (S7-1200 CPU 1215C).
Can I do it from v3.0 to v4.5?
Do I need to take some...
Hello,
I'm having problems with a BeR X20 BC 0043 module.
The LED flashes twice green and once red. Reading the manual, I believe that this...
Hi. I'm struggling with configuration of PN-PN coupler 6ES7 158-3AD10-0XA0.
The situation is as follows:
I have 1 S7-300 PLC on the X2 part of...
What is the production life of one of these controllers. One of our machines is 4 years old and our supplier is saying the controllers need to be...