Feel free to ask any PLC RELATED question here. If you know the answer to an existing question, help everyone by posting an
answer.
Enjoy!!!
Hello, I have an MVI56-MNET module, which is installed together with EN2TR, with a subnet of ~10, all instructions have been added to the project...
Hi everyone:
we have Baumuller AC drive BM4463 300A 160KW, it drives Baumuller AC motor DST2-315BO54W-020-5-A (90KW;RPM 200; 365V; 215A;83Hz)...
I'm attempting to upload a .mer file from a panelview plus 7 performance. I'm using factory talk view studio release number 8.00.00. The panelview...
Hello guys, I'm trying to use the Lenze GDC 4-14 with the system bus adapter 2177, but it doesn't appear in the communication window. It's like I...
Hi guys,
I'm looking for a scetchy piece of software called DecoderProsave.
I saw it being mentioned a couple of times on this and other forums...
Good day,
I have a micro 850 with a 2080-MOT-HSC that is being fed by two flowmeters, Schneider Electric using IMT31's as converters. They are...
Hi All,
I aim to use Aveva Plant SCADA 2020 to read and write data from/to Omron CJ2M CPU35 PLC using OMFINS protocol. However I have Bad Data...
Hello,
First post to these forums, long time reader. I have Micro850 PLC (2080-LC50-48QWB) with 3 2080-IF4 plug-in modules and 2 2080-MOT-HSC...
Possibly a silly question, but when installing load reactors or dV/dt filters on the VFD output, I'm guessing the auto-tune should be completed...
Hello all. I am trying to create a project to download to my CPU312 (312-1AE13-0AB0) and I can't get it to add this device. The device and article...
I like PNP (source) way better. It just seems more natural and correct to be controlling the +DC voltage than the -DC. It is a real pain when...
Hi Everyone,
i am modifying an OMRON Cj2M program and have run into an issue.
How do you find the timer, counter, registers that have already...
Trying to get a G306A panel to talk to an SDM120CTM meter but i can't make the Red Lion make sense of the response from the meter.
Using PC...
So this is my attempt at collecting and displaying data on a Cmore panel With a DL06. Each pair in my logic is the "Time total" or the TA15 and...
Good Evening ,
I should know more about Solid State Relays . I have
a system with 8) 120 vac Vibrators . These Solid State
Relays have...
I am having trouble in getting a VersaMax Micro PLC to communicate with a custom designed Operator Interface-via the
Port 1(The Port with an RJ45...
Hi,
i have made a PLC programing for a CO2 cooling system,
i just cant get the valves for the gas cooler to work right.
first of im using...
My Panelview plus 700 HMI stopped working and I replaced it with a new one. Moved the sd card from the previously installed panel to this one and...
I've exhausted my resources on this one. My customer has thrown 3 Cognex Dataman 262 scanners at me to configure for a project using RSLogix...
Hi, Anyone know Mitsubishi PLC ? I have a A960GOT HMI. When I power it up,
It shows "system is wired incorrectly! please change phase sequence!"...
I need the HSP for 6ES7 215-1AL40-0XB0, does anybody have this?
Thx 🤞🏻
Hey everyone,
I am looking for a version of siemens software to upload and download programs to an S5. I would like a version that runs off of...
Good morning, I have a system on 1756 L73 that works with supervisor on EN2TR modules. Everything works correctly, except that EN2TR (1) with...
Hello,
I have a device with 68 words input.
But one block on the Devicenet Scanner is only 61 words.
I am trying to map this device to 2...
Hi all,
i have a hot water tank (500 gallon best guess) that uses a valve controlled by the plc to fill it.
there is an analog 4-20 ma sensor...