Feel free to ask any PLC RELATED question here. If you know the answer to an existing question, help everyone by posting an
answer.
Enjoy!!!
Hi guys, would you please help me with my CX8090 problem ,when turning on the cx8090 the ERR led keeps blinking red for about 3 minutes after...
This is kind of a beginner question.
Let say I have 2 Rockwell PLC talking to an InTouch standalone installation. Let call them G1_PLC and...
I have a analog card 1715-IF16 with six 4-20ma instruments on it.
The card in a single-ended method. The instrument has been service for a while...
Help please. Im new to Omron and have a machine down. I have a compare = for barcode label scan.
I've attached two pics. On the Mnemonics you can...
Hi all,
I have a PLC, which I have the program for. I want to go online with it, confirm it's the same as my offline copy, and then upload it so...
Hi All
Trying to get the PLC to send a commant to the printer to prinnt a lable. evarything is setup except RS linnx cannot see the printers and...
Hello,
I am provided with PLC tags with PLC_UDT datatype via symbolic connection.
The structure of PLC_UDT (DI_hmi) is:
DI_hmi.stat (UDINT)...
Ex If I Read from Integer file N7:0
N7:0 is an 8 point input card , input 0 and 2 are on , rest off
When I look at :
N7:0 -7 6 5 4 3 2 1 0 I...
Hi guys!!
I'm New here and new with this type of plcs
i have TWDLMDA40DTK and i need to get a copy of the program and i don't have an original...
Hello, I need to connect with a SLC 5/01 (1747-L511) in order to see what is the current program that it has, since I don't have a lot of...
You have to go offline to create the 'Trend' but do you have to download the program to go back Online with the Trend ?
I have a murr IMPACT67 Pro E DIO8 IOL8 M12L 5P and a Magnetic sensor MSA213K. connected to a L18.
encoder is connected to port 0 and I am...
We have 4 PowerFlex 755 drives that have been running for years. Each drive runs two motors. Recently, two of the eight motors began cogging at...
Hi Guys
When using TIA Portal (v16 & V17) does the Upload from device (Software & Hardware) button upload all Parameters from any Inverters...
Hi Guys
In a TIA Portal (v16 and v17) project where there are numerous Siemens G120 Inverter drives in the IO tree all being controlled via...
This week I ran into a customer program that repeatedly used an XIC bit named Off. There was no destructive OTE or OTL setting this bit to...
Hello,
Please I would like to ask a very basic question regarding to ABB AC900 plc or dcs system, does it support a fail safe system another word...
Hello all,
i am new to the servo drive and this brand also. i installed the automation studio v4.12. i have to configure drive with plc B and R...
Hello hope you are doing well! I wan to read the next parameters of a VFD 525:
1. Output Current
2. Average Power
3. Energy Saved
to display...
I'll start off with the caveat that I am new to the industry but I wanted to post a problem I have been dealing with and the workaround that I...
I have 2 new pc's running on Intouch - they 'freeze' every 50 sec for 5 sec long on Viewer -can anyone help me ??
I have a zip file of a program that I'm told was created in Proworx NxT. Would the comments be stored in it if I could find the software or...
I'm in a bit of a conundrum with a server based HMI and I was hoping you all would be help reason and share you experiences with the various...
Hi,
I am currently using ProgramExecute to open a Windows Explorer window in my application to a specific directory (WinCC 7.5). Is there a way...
Hi All
I have a couple of Wecon PI3070IG HMI's to evaluate. They are incredably affordable, so was looking at using for basic pump station /...