Feel free to ask any PLC RELATED question here. If you know the answer to an existing question, help everyone by posting an
answer.
Enjoy!!!
I'm trying to set alarm as DWord where each bit is individual alarm.
So far I have tryed with
DWord.0, DWord.1, DWord.2, etc.
DWord.L0...
Hi guys,
I have the following setup Omron Sysmac C200HX connected to a HMI panel using serial port.
I need to access some data in the PLC...
Trying to get data types (AS Structures) to update after a new tag import is made from PLC. WinCC can show red if an existing element was removed...
I’m attempting to configure KEPWare to poll a Modbus device via Modbus TCP/IP. However, everything I’ve tried results in an error being reported...
Hi, all!
I have a 1768-L45 CompactLogix PLC with a couple of 4-20 temperature transmitters connected to it. I have the temperature scaling...
I have customer that has about 30 Modicon Quantum 534's in their factory and running flawlessly since 1990. Over the years there has been two or...
Since this is the fourth time I have tried adding this post I will be less wordy.
Hello All! New to the site so be easy.
I was wondering if anyone...
Hi All,
Not strictly a PLC question but like myself, a lot of you will use VMWare workstation pro.
I have an issue where I use VCenter...
Hi everyone. I'm beginner with Ifix. I'm appreciate if you share me some document to understand how to play with Ifix 6.0. By the way, I have some...
Hi! I'm wondering if PLCs are used for small-scale production.
I've got four machines doing different things with textiles, and I'm exploring the...
Hi all,
Trying to debug some audit trail code for a customer.
Basically i am trying to understand how the audit trail is set up.
It is a panel...
Hi,
I am using studio 5000 and trying to share my activations between my host pc and guest VMs. I have managed to get this to work using a...
I'm working on an application and have hit a bit of a snag. I need to find an industrial touchscreen display that can:
- Tolerate down to -40C...
Hi folks,
I have an issue with "Movisuite" it's the new engineering program from SEW.
I'm going to use it for the firtst time ever :wizard...
Hi Everybody, this may be one for you motion control guys.
We have been tasked with interfacing some Yaskawa drives into a project where the...
Hi All,
I am having trouble converting a real to string and keep it to 2 decimal places. I'm sure its a simple solution.
Any help is appreciated
Hi everyone,
i have multiple Omron hmi terminals in the plant and i need to upload each program. i have an ns8-tv01b-v2 terminal in the office...
I am trying to implement a sfift-by-wire on a vehicle and for that I am using a standard servo motor...
Dear guys, I am not a programmer but I can do simple things myself. I'm stuck with the following. if I want to extract a value from my rx3i...
Hello. I actually still have a customer that has a 486 running a DOS program controlling a press. My task, convert it to an AB PLC and PV+. I am...
I have just received my brand new redlion G306K hmi. I have never used a redlion screen before. I am attempting to setup communications via...
Hello, using Ignition I want to automatically change the time zone for 30 Allen Bradley plc's at the same time, is there an efficient way to do...
Hello,
since i am starting using intouch, i need some help
Actually i want to make in intouch a String input field. The operator has to insert a...
Hello everyone,
I need your help. At one of my company instalations we have GE90-70, and we're going to replace it with some newer PLC. I prefer...
Hi all! I am using unitronics Unistream plc, controlling two axis X and Y of polishing machine. Control is very simple as I have movement in each...